Electronics House

 RTP-203-SI-12. Size : 2" Paper width & Printing Speed : 57.5mm,80mm/s. Operating Voltage : 12V Interface Type: TTL, RS232 Auto Cutter : Tear Bar Dimensions ...

Additional Information:

• Delivery Time: SAME DAY DELIVERY

The TL431A, B integrated circuits are three-terminal programmable shunt regulator diodes. These monolithic IC voltage references operate as a low.

Additional Information:

• Delivery Time: SAME DAY DELIVERY

The Dragino LT series I/O Modules are Long Range LoRa I/O Controller. It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.

Additional Information:

• Delivery Time: SAME DAY DELIVERY

The part number AD536AJHZ refers to a high-performance, monolithic True RMS-to-DC Converter manufactured by Analog Devices Inc.. It is designed to accurately compute the true root mean square (RMS) value of complex AC (or AC plus DC) input signals and provide a corresponding DC output voltage.

Additional Information:

• Delivery Time: SAME DAY DELIVERY

Outdoor LoRaWAN Gateway

SX1302 + 2 * SX1250

10 programmable parallel demodulation paths

HP0D Outdoor LoRaWAN Full Hotspot:

 

General Information

 

- Model: HP0D

- Type: Outdoor LoRaWAN Full Hotspot

- Frequency: 868 MHz (Europe) or 915 MHz (North America)

 

LoRaWAN Parameters

 

- Spreading Factor: SF7 to SF12

- Bandwidth: 125 kHz, 250 kHz, or 500 kHz

- Data Rate: up to 27.5 kbps

- Sensitivity: -137 dBm (SF12, 125 kHz)

 

Network

 

- Protocol: LoRaWAN 1.0.2

- Network Mode: ABP (Activation by Personalization) or OTAA (Over-the-Air Activation)

 

Interface

 

- Ethernet: 10/100 Mbps

- Wi-Fi: 802.11 b/g/n

- USB: 2.0

 

Power

 

- Power Supply: 12V DC or PoE (Power over Ethernet)

- Power Consumption: 12W (max)

 

Environmental

 

- Operating Temperature: -40°C to 70°C

- Storage Temperature: -40°C to 80°C

- Humidity: 5% to 95% RH (non-condensing)

- IP67 rated for outdoor use

 

Dimensions

 

- Size: 200 mm x 150 mm x 50 mm

- Weight: 1.2 kg

 

Additional Features

 

- Supports up to 1000 devices

- Compatible with multiple LoRaWAN devices

- Easy to use and configure via web interface

- Remote management and firmware updates

 

- GPS and GLONASS support for location tracking

Additional Information:

• Production Capacity: Support Long-Fi
• Delivery Time: within a week

RXM miniature relays are part of Harmony electromechanical relays. This is a plug-in relay to be mounted on a RXZE socket. It is a 2 C/O relay with current rating of 12A, control circuit voltage of 24VDC. It also offers one-step lockable test button and mechanical indicator for contact status. The test button is activated momentarily by pushing the blue pushbutton on the front and locked by flipping up the green part. The mechanical indicator is next to the test button, where an orange flag indicates the relay contact status. A green LED on the front will illuminate when the relay is on. Status display with LED: clearly signal both in the day and night. Its design is fit for industrial machines, packaging, textile, HVAC, automation control panels, low/medium voltage switchgear, motor controls, PLC Interfaces, power supplies, building or medical equipment, lighting controls, RXM Relay should be used with a RXZE socket (screw clamp, screw connector, push-in terminal).

Additional Information:

• Delivery Time: same day delivery